Cavalli Audio Liquid Carbon Manuel - Sayfa 5

Amplifikatör Cavalli Audio Liquid Carbon için çevrimiçi göz atın veya pdf Manuel indirin. Cavalli Audio Liquid Carbon 15 sayfaları. Balanced transportable headphone amplifier

Sayfayı Yazdır

Operation

Your Liquid Carbon® amplifier operates over a wide variety of power conditions, 85-265VAC/50-

60Hz.

1) Insert the proper power cord. Be absolutely sure that your power cord has an approved

safety ground connection from the amp to the outlet.

2) The leftmost pushbutton is the power switch. Push this button in to turn on the map. All

three LEDs on the front panel should light.

3) The center pushbutton is the gain switch. Out is 1X and in is 3X. The LED indicator will be

white for 1X and red for 3X. You can hot switch the gain while listening to music.

4) The right pushbutton is the input selector. Out is balanced and in is SE. The LED indicator

will be white for balanced and red for SE. You can hot switch the input while listening to

music.

5) We recommend that you let the amp warm up for about 15-30 minutes before connecting

headphones and listening (although this is not required).

6) If there are any problems with the normal operation of your amp please contact Cavalli

Audio at [email protected].

Page 5 of 15