Durr XR25 Kullanım Kılavuzu - Sayfa 10

Medya Dönüştürücü Durr XR25 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Durr XR25 14 sayfaları. Film processor

F F F F F

E E E E E

F F F F F

E E E E E

5.6 Filling with chemicals

• Screw in red and black plugs (29), see right

fold-in page.

• Insert separating plate (13) between Fixer

tank „F" and Developer tank „E", black side

towards developer, red side towards fixer.

1.Filling up tank F-fixer (red):

• Pour in large red bottle A and top up with

cold water to the lower mark (14).

• Now pour in small red bottle B and top up

with cold water to the upper mark (15).

2.Filling up tank E-developer (black):

• Pour in large black bottle A and top up with

cold water to the lower mark (16).

• Now pour in small black bottle B and top up

with cold water to the upper mark (17).

• Take out separating plate (13), clean it and

store it.

• Replace bath (11), see fig.6.

5.7 Insert roller sets

see right fold-in page and fig.14.

• Firstly, lift all latches (25) ready to receive

roller sets.

• Insert roller sets. Secure all latches (25) and

catches (24).

5.8 Replace lid

see fig.2 (7).

The lid should fit easily. If not, check

that all catches (24) and latches (25)

are properly closed.

5.9 Making XR25 ready for use

• Insert mains plug

• Power switch (G) ON, see p.5.

Yellow indicator (D) lights up, warm up phase

begins (approx.20mins.) As soon as the

green indicator (C) lights up, the correct

temperature has been reached and the XR25

is ready for use.