Elsema G-2000 Manuel - Sayfa 7
Alıcı Elsema G-2000 için çevrimiçi göz atın veya pdf Manuel indirin. Elsema G-2000 13 sayfaları. 3g receiver with relay output for opening sliding, swing gates, doors or switching devices
Sayfayı Yazdır
If using SMS commands to setup the G-2000:
1. Type the relevant SMS commands in your phone and send it to the G-2000 controller SIM number.
2. Commands must be in CAPITAL LETTERS. Do not leave any space between the letters or words.
(e.g. "TEL" is correct while "tel" is incorrect)
3. If the G-2000 is used to operate only a gate, all the user has to do is to change the default password and
enter the authorized numbers.
4. Keep a list of the authorized numbers for future reference.
5. If you cannot send or receive any SMS messages from your phone to the G-2000 try adding + in front of
the phone numbers or the country code.
SMS Commands: Below are the SMS commands needed for the G-2000. In the examples the default password
is used (1234). Please replace this with your own password if you have changed it.
Setup a new password
PwdPnewpassword
o
E.g The default password is 1234 and it has to be changed to 8787, the SMS command needed is:
1234P8787
If your password is successfully changed the unit will send you an SMS message "Password changed to:
"8787"
The below setup must be done if users are required to access the G-2000 at certain times.
Setup time and date
PwdTELnumber of the SIM card#
o
E.g This sets the time date for the G-2000. The SMS command needed is (assuming the number of the SIM
card is 0460773679):
1234TEL0460773679#
Setup Authorized Numbers
PwdAserial number#authorized number#start time# end time#
o
Serial number: User position 000-999.
Start time: yy(year) mm (month) dd (day) hh (hour) mm (minute)
End time: yy(year) mm (month) dd (day) hh (hour) mm (minute)
E.g The following number 0435792468 is to be setup as the second user; the following SMS command is
needed:
1234A002#0435792468# : the user 0435792468 can call anytime to access the G-2000.
1234A004#0450755623#1505040800#1510061700# : the user 0450755623 on position 4 can
only access the G-2000 from 4
Authorized numbers are mobile numbers of all users who will be using their phones to operate the G-2000.
Serial number is the position of all stored numbers (authorized users). 001-999 users
www.elsema.com
th
of May, 2015 8:00am to 6
Page 7
th
of October, 2015 5:00pm.
ELSEMA
3G Receiver with relay output, G-2000