elsner elektronik 70391 Kurulum ve Ayarlama - Sayfa 11
Kontrol Ünitesi elsner elektronik 70391 için çevrimiçi göz atın veya pdf Kurulum ve Ayarlama indirin. elsner elektronik 70391 18 sayfaları. Door operator control module
Sayfayı Yazdır
When receiving "Output 1 + 2 - Impulse"
when object value = 1
When receiving "Output 1 + 2 - Impulse"
when object value = 0
When receiving "Output 3 - Impulse" when
object value = 0 or 1
Output 3 relay contact
Impulse mode: (1, 2 or 3 doors)
Output 1 reacts to the (is assigned to the object) Output 1 - Impulse and receives an
impulse (closes for 1 s) when the object value is 1.
Output 2 reacts to the (is assigned to the object) Output 2 - Impulse and receives an
impulse (closes for 1 s) when the object value is 1.
Output 3 reacts to the (is assigned to the object) Output 3 - Impulse and receives an
impulse (closes for 1 s) when the object value is 1.
No further settings can be made for the outputs.
Operating mode
Allows control of up to three doors
When receiving "Output 1 - Impulse" when
object value = 0
When receiving "Output 1 - Impulse" when
object value = 1
When receiving "Output 2 - Impulse" when
object value = 0
When receiving "Output 2 - Impulse" when
object value = 1
When receiving "Output 3 - Impulse" when
object value = 0
When receiving "Output 3 - Impulse" when
object value = 1
Dead-man mode: (2 doors)
Output 1 react to the object (is assigned to the object) Output 1 - Impulse. At value = 1,
the output closes; at value 0, it opens.
Output 2 react to the object (is assigned to the object) Output 2 - Impulse. At value = 1,
the output closes; at value 0, it opens.
Output 3 react to the object (is assigned to the object) Output 3 - Impulse and gets an
impulse (closes for 1 second) at object value 1.
In addition, monitoring can be set. After the monitoring period, the object is set to 0
(unless a new 1 signal is received), i.e. the output is opened:
Door operator control module KNX A3-B2 • Status: 17.12.2019 • Technical changes and errors reserved.
9
Output 1 Impulse
Output 2 Impulse
Output 3 Impulse
normally closed • normallly open
Impulse mode
nothing
Output 1 Impulse
nothing
Output 2 Impulse
nothing
Output 3 Impulse
Parameter setting