CBE DS-520AN Kullanım Kılavuzu - Sayfa 3
Endüstriyel Ekipmanlar CBE DS-520AN için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CBE DS-520AN 13 sayfaları.
Sayfayı Yazdır
1
2
3
C APTIONS
1)
Test button to check both internal and external temperature and to set the clock.
2)
Test button to check the voltage of the leisure battery (B2) and car battery (B1), to check charge
and discharge currents of leisure battery and to set the clock.
3)
Test button to check the level in % of the drink and waste water tank
4)
Auxiliary output switch.
5)
Main switch (see minimum voltage control).
6)
Water pump switch.
7)
Lights main switch.
8)
Digital display of the clock and of the required test
9)
It shows the starting up of the battery parallel when the engine is started.
10)
It shows the car (B1) battery test, the blinking means run-down battery alarm.
11)
It shows the leisure (B2) battery test, the blinking means run-down battery alarm.
12)
It shows the batteries recharging through engine alternator.
13)
It shows the test or alarm of batteries together with the symbols 10 or 11.
14)
It shows the connection to the 230V net.
15)
It shows that the minimal voltage device has switched on.
16)
It shows the drink water tank test, the blinking means empty tank alarm.
17)
It shows the waste water tank test, the blinking means full waste water tank alarm.
18)
It shows the unit of measure: U=Volt, A=Ampere, °C and temperature reference I=internal
temperature, E=external temperature.
NOTE:
The watch is supplied from the leisure battery (B2).
Should B2 be disconnected, the watch is able to keep working, without visualization, for about
2 weeks.
CONTROL PANEL "PC-200T 4t IH"
G
G
8
9
10
11
12
AUX
%
%
13
14
15
16
17
14
MOTOR
CAMPERS
P C - 2 0 0
18
and to set the clock.
4
5
6
7