Dataman Cipher 1660 BT Portable Hızlı Başlangıç Kılavuzu - Sayfa 5

Barkod okuyucu Dataman Cipher 1660 BT Portable için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Dataman Cipher 1660 BT Portable 9 sayfaları. Ccd scanners

Sayfayı Yazdır

OPERATING THE 1660 BT IN REMOTE COLLECTION (BATCH) MODE.

While the Cipher Labs 1660 BT can be conveniently used as a personal wirelessly linked bar

code scanner, the real power and benefit of the 1660 BT portable comes from its ability to be

used remotely to collect asset and stock data.

The 1660 BT's wireless range is limited to 10 metres when operated in standard (non-batch)

mode, provision is made within the design so that any bar codes that might be scanned while

the unit is operating outside of the 10-metre bluetooth range are still retained. When the 1660

BT is operating in standard (non-batch) mode and detects an out of range condition (usually

indicated by three short beeps) it will save the scanned bar codes to temporary memory.

"Start"; or (No 3) "Begin Instruction Mode" and end by scanning the "Update (Exit) or

Finish Instruction Mode" bar code.

1660 BT can be used remotely it will be

Before the

necessary to instruct the unit to enter Batch Mode. The

way this is accomplished is to initially scan each of the

three bar codes at the top left section of the command

chart titled "Set for Remote Data Collection Mode".

Scan each bar code 1, 2, 3 in this order.

Once the 1660 BT is set for batch mode operation it can

be taken any distance from the computer and its

associated 3610 transponder, all data scanned while in

batch mode is stored in the 1660 BT's 256-Kb non-volatile

flash memory. When the collected and stored data needs

to be downloaded to the computer, the command bar

codes in the section "Steps for Downloading Data to

the Server" are used. Importantly the 1660 BT should be

returned to within the 10-metre bluetooth range of the

3610 transponder before downloading is attempted.

As soon as the 1660 BT is returned

within the 10-metre wireless range any

data stored in the temporary memory will

immediately

sent

transponder. The 1660 BT should not

be operated in standard (non-batch)

mode for extended periods outside of

the 10-metre range to avoid exceeding

the temporary memory storage capacity

and consequent potential loss of data.

If the 1660 BT is to be used outside of

the 10-metre bluetooth range for long

periods it should be configured to

operate in remote collection (batch)

mode. The accompanying A4 Dataman

bar code command chart (left) has been

provided to assist in this operation.

The bar code command chart is laid out

in three distinct sections "Set for

Remote Data Collection Mode"; "Set

for Normal Operation" and "Steps for

Downloading Data to the Server". The

chart contains certain instructions and

comments on usage, all operations

should commence by scanning the top

most bar code of each section e.g. (No

1) "Start Instruction Mode"; or (No 2)

to the

3610