Datamax M-Class Mark II Manuel - Sayfa 10

Barkod okuyucu Datamax M-Class Mark II için çevrimiçi göz atın veya pdf Manuel indirin. Datamax M-Class Mark II 10 sayfaları. Rfid option
Ayrıca Datamax M-Class Mark II için: Manuel (6 sayfalar), Manuel (8 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Hızlı Başlangıç Kılavuzu (6 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar)

 Remove Upper Roller Shaft and associated

Rollers.

 Clean all surfaces of the Rollers and the Upper

Roller Shaft. Isopropyl Alcohol can be used,

for heavy or stubborn deposits WD-40 or an

adhesive remover can be used. Be sure all the

ridges on the rollers are free of debris.

 Re-assemble the Upper Roller Shaft, Rollers,

and C-Clip into the Peel Mechanism Assembly.

Lower Rollers:

 Remove the Peel Mechanism from the printer.

Press in on the Latch and allow the Front Cover

to swing open.

 Push in on the Tab as shown, repeat for the

other side and then remove the entire Lower

Roller Assembly.

 Remove Lower Roller Shaft and associated

Rollers. Note the order of the Rollers as they

are removed, they must be re-installed in the

same order.

 Clean all surfaces of the Rollers and the Lower

Roller Shaft. Isopropyl Alcohol can be used,

for heavy or stubborn deposits WD-40 or an

adhesive remover can be used. Be sure all the

ridges on the rollers are free of debris.

 Re-assemble the Lower Roller Shaft and

Rollers. Reinstall the assembly into the Peel

Mechanism Assembly

Upper Roller

Shaft

Lower Roller

Assembly

Lower Roller

Shaft

Rollers

Push in on Tab