ADE Klara BE 1006 Kullanım Kılavuzu - Sayfa 3

Terazi ADE Klara BE 1006 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ADE Klara BE 1006 4 sayfaları.

Sayfayı Yazdır

Preparation:

Open the battery cover at the bottom side at the scale and remove the battery safety strip.

Please ensure the correct polarity of the batteries

(+1-).

There is a little black push button next to the battery case (KG/LBlS1] for country specific

settings with the option to switch from KG

kilogram to LB

pound or ST

stone.

Please pay attention to use the scale under consideration of your country specific urit of

weight.

3. Weighing function

Switch-on the scale by using the tap-an-function. For this, tap with your foot short and

forceful on the certre of the scale.

The

display indicates the signal "8888" and a few

seconds later "0.0 kg". Now the scale is ready to use.

2. Step on the centre of the scale. Remain stationary on the weighing platform and do not

hold you tight. After a few seconds, your weight will be indicating in the display.

After weighing, step off the scale.

The

scale will switch-off automatically after a few

seconds.

Error

Messages

"FFFF"

Overload

The weight exceeds the maximum capacity of 150 kg. Please

immediately remove the cri1icalload to avoid load celi damage.

"La'

Batteries are used up

Please replaoe the battery with the intended type (1 x CR 2032).

5. Technical Data

Capacity x graduation:

Dimensions:

Battery:

max. 150 kg x 100 g

300 mm x 300 mmx 18 mm

1 x CR 2032 Onduded)

Subject to techrical modifICations

6. Warranty

ADE warrants for a period of 3 years from the date of purchase that

will remedy any

defects due to fauty material or workmanship free of charge by repair or replacement.

When purchasing, please have the warranty coupon signed and stamped by the dealer.

When making a guarantee claim, please return the weighing scale together with the

guarantee card including the reason of complaint to your dealer.

CE-Conformity - This device features radio interference

suppression in compliance with valid EC Regulation

2004/108