ADE LW100-3 Kullanım Kılavuzu - Sayfa 13

Terazi ADE LW100-3 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ADE LW100-3 20 sayfaları. Electronic, price-computing calibrated retail scales

Sayfayı Yazdır

Faults

Fault

The scale has switched off

automatically.

The display

shows nothing.

The scale is not connected to the

mains.

Draughts or air movements

Weight display is

Vibrations

unstable.

Electromagnetic fields / static

charging

The scale is not levelled

properly.

The weighing

The scale is not operating in the

result is

specified temperature range.

obviously wrong.

Electromagnetic fields / static

charging

Zeroing is not possible if the

Zeroing is not

displayed weight exceeds +/- 2%

possible.

of the capacity of the scale.

Error messages

Failure

Current weight exceeds the zero

ERR 4

range of the scale

ERR 5

Keypad fault

Load cell is defective or not

ERR 6

connected.

Weighing result unstable due to

draughts, air movement or

Err 9

vibrations.

Load cell is defective.

Current weight exceeds the

Err 19

permissible range for automatic

zeroing when switched on.

Zero range or weighing capacity

--oL--

exceeded

-- UL --

Underload (-20d)

LW100-210408-Rev002-UM-en

Cause

Measure

Switch on the scale

Use the optional mains adapter to

connect the scale to the mains.

Close the window.

Choose a different location.

Avoid vibrations.

Choose a different location.

Choose a different location. If

possible, switch off the interfering

device.

Adjust the support feet. Use the

spirit level to check the horizontal

position.

Operate the scale only in the

permissible temperature ranges.

Choose a different location. If

possible, switch off the interfering

device.

In this case, switch the scale off and

on again.

Measure

Unload the weighing surface and try

again.

If necessary, restart the scale.

Please contact your service partner.

Avoid draughts, air movement and

vibrations.

Please contact your service partner.

Unload the weighing surface and

then restart the scale if necessary.

Unload the scale.

Switch the scale off and on again.