DV Systems A5 (T) Kurulum ve Servis Kılavuzu - Sayfa 3

Hava Kompresörü DV Systems A5 (T) için çevrimiçi göz atın veya pdf Kurulum ve Servis Kılavuzu indirin. DV Systems A5 (T) 19 sayfaları. Rotary screw

Unit Operation.

Shown below is the 'CSC15' Controller which regulates the operation of the Unit. Unit Status LEDs, Hour Meter,

and ON/OFF switch are located on the control panel cover.

Starting the Unit:

Stopping the Unit:

Note:

1. Do not stop the Unit by use of a disconnect or breaker.

Using the disconnect, or breaker to stop the Unit will not allow the Unit to go

through an unloading sequence, and could result in damage to the Motor, Starter,

or other electrical components. Damage caused in this manner is not covered by

the manufacturers Warranty.

Hour Meter.

Displays the number of

running hours.

Start / Stop Switch

ON position:

Starts compressor

OFF position:

Compressor unloads for 10

seconds and then stops

Quick Start (cont'd)

Turn the Selector Switch to 'ON' position.

Turn the Switch to 'OFF' position, unit will unload for 10 seconds prior to stopping.

Fault Light.

Compressor fault indicator:

ON Solid =

Fast Flash =

Two Flashes =

Three Flashes = Overload Fault

*Depress 'Reset' button within

cabinet to clear fault.

- 3 -

Sep '15

Power Light.

Turns on when power

has been applied to the

unit.

Anti-Rotation

Power Interruption

Service Due*

A5-C