Datastrip DSVII-SC Kullanıcı Kılavuzu - Sayfa 11

El bilgisayarları Datastrip DSVII-SC için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Datastrip DSVII-SC 19 sayfaları.

Sayfayı Yazdır
9

Troubleshooting

•
UNIT DOES NOT POWER UP – The battery may be not plugged in, or is completely discharged. Open the
battery access cover and verify that at least one battery is properly installed. Additionally, use the external AC
power adapter to operate the unit and simultaneously charge the battery.
Charging
and Replacement
•
Unit generates a single "error" beep tone, and the power LED flashes RED once. – This is an indication
that the internal battery is very low, and does not have sufficient charge to run the unit at all. Plug in the AC
power adapter to change the battery.
DSVII-SC
User Manual, Version 1.11
®
on Page 7.
Copyright © 2006 by Datastrip, Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
Please refer to Section 7 Battery
11