Datastrip DSVII-SC Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Ручні комп'ютери Datastrip DSVII-SC. Datastrip DSVII-SC 19 сторінок.

Troubleshooting

•

UNIT DOES NOT POWER UP – The battery may be not plugged in, or is completely discharged. Open the

battery access cover and verify that at least one battery is properly installed. Additionally, use the external AC

power adapter to operate the unit and simultaneously charge the battery.

Charging

and Replacement

•

Unit generates a single "error" beep tone, and the power LED flashes RED once. – This is an indication

that the internal battery is very low, and does not have sufficient charge to run the unit at all. Plug in the AC

power adapter to change the battery.

DSVII-SC

User Manual, Version 1.11

on Page 7.

Reproduction in whole or in part is prohibited.

Please refer to Section 7 Battery