AUSSIE TONNEAU ATB01002 Montaj Talimatı

Otomobil Aksesuarları AUSSIE TONNEAU ATB01002 için çevrimiçi göz atın veya pdf Montaj Talimatı indirin. AUSSIE TONNEAU ATB01002 2 sayfaları. For ford falcon xd xe xf xg xh single cab 1979 – 1999

Sayfayı Yazdır

TONNEAU COVER FITTING INSTRUCTION

BASIC TOOLS REQUIRED

Drill, 4mm Drill Bits, Rivet Gun, Marking Pencil/ Pen

CONTENTS

1 x Tonneau Cover

2 x Support Bars

1 x Fitting Instruction

1. INSTALLATION PROCEDURE

NOTE

Read entire instructions prior to start.

STEP 1

Fit the front of the Tonneau to the front of the Ute tub placing the LTD clips (Fitted on the

Tonneau Cover) on to the LTD posts already fitted on the body.

(Behind rear windscreen).

STEP 2

Fit your tonneau cover support bar/s into position (Refer to the instructions below)

STEP 3

Drape cover over support bars.

STEP 4

Fit Bunji Loops to Body Hooks, starting at the rear then fitting the side's bunjis.

STEP 5

Your Tonneau Cover is now fitted.

2. MULTI-FIT SUPPORT BAR

The Aussie Tonneau Multi - Fit Support Bar is designed to fit almost all Utes on the Market, from Suburu Brumbys

to Cab Chassis aluminium trays.

2.1 BASIC TOOL REQUIRED

Drill, 4mm drill bit

2.2 MULTI-FIT SUPPORT BAR CONTENTS

1 x hollow bar centrepiece

2 x solid bar end piece

FORD FALCON

XD XE XF XG XH SINGLE CAB

1979 – 1999

PART NO: ATB01002

2 x grub screws

- 4 x Bar Brackets

- 8 x Rivets