Datcon DT1600 U Series Kullanım Talimatları Kılavuzu - Sayfa 15

Verici Datcon DT1600 U Series için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Datcon DT1600 U Series 20 sayfaları. Ac voltage transmitters

Sayfayı Yazdır

DT1600 Ux xx xx

Dismounting from the

rail

20180621-V0

7. Dismounting

7.1. Dismounting procedure

Before dismounting take note the warnings written in

Chapter 5.1.

The following figure shows the dismounting procedures:

The dismounting procedure needs a screwdriver for slotted

screws.

Before dismounting disconnect all wires.

1. Put the screwdriver end into the fixing assembly's hole

(figure step 1.).

2. Lift the screwdriver handle until it possible to open the

fixing assembly (figure step 2.).

3. Keeping the screwdriver in this position lift the instrument

bottom from the bottom edge of the rail (figure step 3.).

Lift the whole instrument (you may put out the screwdriver)

(figure step 4), the instrument will be free.

7.2. Disposal

According with the concerning EU directive, the

manufacturer undertakes the disposal of the instrument that

are manufactured by it and intended to be destroyed.

Please deliver it in contamination-free condition to the site

of the Manufacturer or to a specialized recycling company.