DVS G3 İşletme Manüelleri - Sayfa 5
Fan DVS G3 için çevrimiçi göz atın veya pdf İşletme Manüelleri indirin. DVS G3 10 sayfaları. Small inline filter
Ayrıca DVS G3 için: Kullanım Kılavuzu (3 sayfalar), Montaj Talimatları (2 sayfalar)
Sayfayı Yazdır
Select today's day and time by pressing the DAY, HOUR and MIN buttons (to make them change
faster hold the button down). If you go past your desired day and/or time, just keep pressing the DAY,
HOUR and MIN buttons until the desired day and/or time re-appears. Press EXIT to finish.
NOTE: This is a 24 hour clock so please ensure that the correct time is set, e.g. 4.30pm should
be set as 16:30.
Changing the Filter Service Reminder
The FILTER reminder screen will appear when the filter service timer has counted down to 0 months.
This is a reminder that your filters should be changed or serviced. We recommend changing your
filters approximately every 12 months. The filter reminder timer will have been set by our installer at
the time of installation.
NOTE: Once you enter the FILTER menu, it will automatically re-set the due period to 12. Any
other time frame can be set by using the UP/DOWN arrows.
We recommend that the G3 Reclaim is serviced annually to check the system, replace the filters and
clean the condensate drain. DVS has a Service Contract that can be ordered for this purpose. With
the Service Contract, there is no need to contact DVS as we will have a service technician call you to
book a time each year. Alternatively, you can contact DVS to book an annual service or order
replacement filters and undertake the work yourself. "Appendix 2" provides information on how to
change your filter.
Changing Screen Contrast
To Adjust the Screen Contrast for easier viewing if the LCD screen is too dark or light. Use the
MENU and MORE buttons to bring up the SYSTEM MENU then access and adjust the Screen
Contrast to best suit its position in your home and the surrounding conditions.
De-activating the Screen for Cleaning
To de-activate the touch screen for 30 seconds to allow the surface to be cleaned (with a soft dry
cloth), press and hold down the '387 387' numbers at the bottom of the screen for 5 seconds until the
screen goes blank and a message "Touch screen disabled to allow cleaning" appears. After 30
seconds, the screen will return to the Current Status screen. Repeat if more time is needed to
complete cleaning. See Section below on Care of Your LCD screen
Care of Your G3 Reclaim LCD Touch Screen
The LCD touch screen is a sensitive piece of electronic equipment. To get the best performance
and longest life possible from your screen please follow the guidelines below:
The display panel is made of glass. While the G3 Reclaim LCD Screen and Control
panel is quite robust, do not subject the screen to a mechanical shock by knocking or hitting the
surface, or pressing it with excessive force;
If the display panel is damaged and the liquid crystal substance leaks out, avoid getting
any in your mouth. In case of ingestion please contact the National Poison Centre 0800 764 766
(0800 POISON) for advice. If the substance contacts your skin or clothes, w ash it off using soap
and water;
Do not apply excessive force to the display surface of the LCD module when pressing
as it is soft and easily scratched;
Do not scratch the surface with a hard or sharp object;
DO NOT use any solvents to clean the screen as they may damage the polarised
surface of the glass. In particular do NOT use water, ketone or aromatic solvents under any
circumstances.
To clean the screen surface, first de-activate the touch screen for 30 seconds by pressing on the
387 387 phone number at the bottom of the screen and holding it down for 5 seconds.
Alternatively, if the CHILD LOCK is activated this will lock the screen. Then breathe on the face
plate and wipe it gently with any lint-free, soft, dry cloth or tissue to remove any dirt or smudges
from the screen.
5