Austin Scientifi E1000 Kullanıcı Kılavuzu - Sayfa 6

Sıcaklık Kontrolörü Austin Scientifi E1000 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Austin Scientifi E1000 18 sayfaları. Dual temperature controller

Sayfayı Yazdır

6 – Mode Selection. 2 miniature slide

switches allow the user to select either

Coldhead or Waterpump mode. In the

coldhead mode, the channel will provide

power to the output at all times and will

operate the relays according to the user

set temperatures. In the Cryopump mode,

power will be supplied at all times to the

coldhead, unless, the manual mode is

selected. To change the Mode of the

E1000, the power switch must be turned

off and back on after changing the

positioni of the switch.

•

/0111 %

7 – Compressor Power in.

power from the compressor. Requires

special drive cable.

8 – Compressor Power Out. Power out to

drive and additional E1000. The power is

fused at 3 amps.

9 – Coldhead out - Output power to the

coldhead or water pump. Uses standard

cryopump drive cable.

The Business of Science

Input drive