Cookology GH601SS Kullanıcı Kılavuzu - Sayfa 15

Hob Cookology GH601SS için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cookology GH601SS 19 sayfaları. Built in gas hob

Sayfayı Yazdır
o Put the gas seal inside of the 15 mm x ½" female coupler .
o Fully tighten the 15 mm x ½" female coupler and seal onto
the gas rail.
o IMPORTANT: The female coupler must be positioned the
right way up, as shown in the picture on the previous page.
o Gas pressure may be checked on a semi-rapid hob burner.
Remove the appropriate injector and attach a test nipple.
Light the other burners and observe that the gas pressure
complies with the gas standards in force.
o IMPORTANT: On completion carry out a gas soundness
test.
Gas adjustment (Conversion to LPG)
All work must be carried out by a GASSAFE
registered engineer.
IMPORTANT: Always isolate the hob from the electricity
supply before changing the injectors and/or adjusting the
minimum flow of the burners.
Remove the pan-stands, burners and flame spreaders (A).
Unscrew the injector (B) and replace it with the stipulated
injector for the new gas supply (see table on next page).
15