4tech MiniCom Guardian Hızlı Başlangıç Kılavuzu - Sayfa 3

Ölçüm Cihazları 4tech MiniCom Guardian için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. 4tech MiniCom Guardian 4 sayfaları. Monitoring system

Temperature
Humidity
Power supply
Telephone no:
Serial no:
The MiniCom Guardian is configured using simple SMS
commands. Several commands may be sent as one
single SMS separated by spaces.
Example (max/min values equals factory presets):
ID="Server room" MINTEMP=18 MAXTEMP=26
MINHUM=10 MAXHUM=60 PHN=1,[your phone
number]
This command sets the "name" of the Guardian to
"Server room", the minimum temperature limit to 18° C,
the maximum temperature limit to 26° C, the relative
humidity minimum limit to 10% and the relative humidity
maximum limit to 60%. Alarms will be sent to your
phone number. Please note that the ID requires double
quotation marks (" ") if the string includes spaces.
1. Send the configuration commands to the Guardian
phone number as shown in the example.
phone number as shown in the example.
The command results in the following response from
Guardian:
Server room:
Temp: 23,8'C (min:18 max:26)
Humidity: 42% (min:10 max:60)
No active alarms
A second response from the MiniCom Guardian:
MID=MC <serial number> OK
The number is the serial number on your Guardian. The
"OK" is an acknowledge that the commands have been
accepted. If anything was erroneous, you will get the
"ERROR" response.
2. Set MiniCom Guardian distinctive phone number by
sending: PH=the inserted SIM card number
The command results in following response from the
Guardian:
MID=MC<serial number> OK
Please visit
.4tech.no
WWW
for further information.
Monitoring
®