Airwell RC5 Manuel - Sayfa 6

Uzaktan Kumanda Airwell RC5 için çevrimiçi göz atın veya pdf Manuel indirin. Airwell RC5 8 sayfaları. For room air conditioner
Ayrıca Airwell RC5 için: Programlama ve Kullanım Kılavuzu (11 sayfalar)

Sayfayı Yazdır

OPERATION

ADJUSTING THE FAN SPEED

AUTOMATIC

Simply set the FAN SPEED selector to the

position . A microcomputer automatically controls

the fan speed when the AUTO mode is selected.

When the air conditioner starts operating, the

difference between the room temperature

and the set temperature is detected by the

microcomputer which then automatically switches

the fan speed to the most suitable level.

NOTE

In FAN Only mode the fan speed is adjusted

automatically as in cooling mode.

WHEN DIFFERENCE BETWEEN

ROOM TEMPERATURE AND SET

TEMPERATURE IS

2 °C and over

Cooling and

dehumidifying

Between 2 and 1 °C

modes:

Below 1 °C

2 °C and over

Heating mode:

Below 2 °C

The above mentioned data make reference

to the conditioner operating when the sensor

on the remote control unit is ON. If the sensor

on the indoor unit is being used then actual

operation will slightly differ from that described

in the above tables.

MANUAL

If you want to manually adjust speed just set the

FAN SPEED selector as desired.

Each time the button is pressed, the fan speed is

changed in sequence:

(Lo)

(Med)

FAN SPEED

High

Medium

Low

High

Medium

(Hi)

(AUTO)

SLEEP MODE

The SLEEP mode enables you to save energy.

1. Set the MODE selector to cool, dry or heat.

2. Press the SLEEP button.

3. The

mark appears on the display. Press

the SLEEP button again to release the SLEEP

function.

What does the SLEEP mode mean?

In this mode, the air conditioner will cool or

heat the room to the set temperature, and

then the thermostat will make the unit pause.

After about 1 hour, the air conditioner will

automatically reset the set temperature as

follows (also refer to graphs).

OPERATING MODE

Heating

Cooling and Dehumidifying

When the room temperature reaches the new

set value, the thermostat will cause the unit to

pause. After about 1 hour the temperature will be

raised by 1 °C in cooling, or lowered by 1 °C in

heating. This enables you to save energy without

sacrificing your comfort.

COOLING AND DEHUMIDIFYING

Setting temperature

1 hour

Setting temperature

SET TEMPERATURE CHANGE

Lowered by 1 °C

Raised by 1 °C

Room temperature

TIME

HEATING

Room temperature

1 hour

TIME