Dymo LabelManager Wireless PnP Hızlı Başlangıç Kılavuzu - Sayfa 8
Etiket makinesi Dymo LabelManager Wireless PnP için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Dymo LabelManager Wireless PnP 13 sayfaları. Dymo labelmanager wireless pnp technical datasheet
Ayrıca Dymo LabelManager Wireless PnP için: Teknik Veri Sayfası (7 sayfalar), Genel Bakış (12 sayfalar), Hızlı Kılavuz (2 sayfalar), Hızlı Başlangıç Kılavuzu (17 sayfalar)
Sayfayı Yazdır
- 1. Quick Start
- 2. Inserting the Battery
- 3. Inserting the Label Cassette
- 4. Connecting the Label Maker to Your Computer
- 5. Starting the Built-In Software
- 6. Disconnecting the Label Maker from Your Computer
- 7. Maintaining Your Label Maker
- 8. Recharging the Battery
- 9. Cleaning the Label Maker
- 10. Troubleshooting
Maintaining Your Label Maker
Recharging the Battery
The label maker is shipped with the lithium-ion battery partially charged. The
battery is recharged through the USB connection to your computer.
The label maker must be connected to a powered USB port. The label
NOTE
maker may not charge or function properly when connected to a non-powered
USB port, such as those on some Mac keyboards, or a non-powered USB hub.
The label maker status is displayed in the lower-left corner of the software
window. The following table describes the possible states of the label maker.
To charge the battery
Make sure the USB cable is connected to both the label maker and
1
the computer.
If necessary, press the power button to turn on the label maker and begin
2
charging the battery.
6
Label maker is connected and battery
is charging
Label maker is connected and battery
is not charging
Label maker is not connected
Label maker is connected and there is
a problem with the battery