Dymo Rhino 1011 Metal Tape Embosser Kullanıcı Kılavuzu - Sayfa 5
Etiket makinesi Dymo Rhino 1011 Metal Tape Embosser için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dymo Rhino 1011 Metal Tape Embosser 14 sayfaları. Metal tape embosser
Sayfayı Yazdır
Cutting the Tape
To cut the tape
1. Squeeze the embossing handle half-way, several times until the
tape extends from the front of the cutting assembly (M) by at least
1 cm (1").
Before cutting the tape, make sure the end of the tape
extends beyond the edge of the cutting assembly so you can easily
pull the label out. Otherwise, a tape jam may occur.
2. Lift the cutting handle (I) gently until it is vertical to cut the tape.
I
M
5