Dymo LabelWriter 450 Duo Label Printer Donanım Kılavuzu

Yazılım Dymo LabelWriter 450 Duo Label Printer için çevrimiçi göz atın veya pdf Donanım Kılavuzu indirin. Dymo LabelWriter 450 Duo Label Printer 2 sayfaları. Labelwriter series label printers
Ayrıca Dymo LabelWriter 450 Duo Label Printer için: Hızlı Başlangıç Kılavuzu (20 sayfalar), Hızlı Başlangıç Kılavuzu (16 sayfalar), Hızlı Başlangıç Kılavuzu (20 sayfalar), Genel Bakış (2 sayfalar), Kullanıcı Kılavuzu (19 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar)

KnT Loading Dymo Labels 1

http://www.keepntrack.com/mediawiki/index.php/Loading_Printer_Labels_and_Paper

KeepnTrack - Hardware:

Loading Dymo Labels

(& Receipt Paper)

Learn how to load labels and receipt paper into your Dymo printer.

NOTE: This video shows the DYMO LabelWriter 450 Twin Turbo.

Setting Up

Be aware you should be using speciﬁc labels, the COMPanion

Yellow Badge Labels (part number V6101), or speciﬁc paper, the

Continuous Wide Student Pass Paper (part number V6301).

Open the printer by lifting the cover and remove any packing

materials.

After unpacking your printer and plugging it in, you should see two

blue lights in the front. These are called form-feed buttons. Press

them now to eject the protective labels.

You can also press the arrow buttons to remove the labels

backwards, or gently pull the labels through by hand.

Loading the Labels

Look inside the printer and you will see directions that will help

you with the next step.

Load the labels onto the spool with the labels feeding from below,

and with the little hole on the left.

Making sure that the roll is positioned tightly on the spool with no

gap between the roll and the spool.