Dymo LabelWriter 450 Duo Label Printer Donanım Kılavuzu - Sayfa 2

Yazılım Dymo LabelWriter 450 Duo Label Printer için çevrimiçi göz atın veya pdf Donanım Kılavuzu indirin. Dymo LabelWriter 450 Duo Label Printer 2 sayfaları. Labelwriter series label printers
Ayrıca Dymo LabelWriter 450 Duo Label Printer için: Hızlı Başlangıç Kılavuzu (20 sayfalar), Hızlı Başlangıç Kılavuzu (16 sayfalar), Hızlı Başlangıç Kılavuzu (20 sayfalar), Genel Bakış (2 sayfalar), Kullanıcı Kılavuzu (19 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar)

KnT Loading Dymo Labels 2

Place the spool in the printer.

Feed the end of the labels into the printer, aligning the labels with

the left wall of the printer and against the label guide.

Press the form-feed button on the front of the printer. Gently close

the lid. An error light will blink if the paper isn't installed correctly.

Your Light Guide

If you see a ﬂashing blue light, it means the labels are not loaded

properly, or the label roll is empty.

A solid blue light means the power is ON and the printer is ready

to roll.

A dimmed blue light means the printer is in power-saving mode.

Note: Loading paper follows the same procedure.

Support

NOTE: These labels are heat sensitive. Do not expose to heat,

direct sunlight, or moisture while storing.

If you have any questions or need assistance using your Dymo

printer with KeepnTrack, please call KeepnTrack Technical

Support at 1-800-320-5830.