Gadhouse HENRY Kullanıcı Kılavuzu - Sayfa 11

Pikap Gadhouse HENRY için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Gadhouse HENRY 13 sayfaları.

Sayfayı Yazdır

Problem

The device does not support the proﬁles

Cannot connect

required for this product.

Bluetooth with

The Bluetooth function of the device is not

the HENRY turntable.

enabled. Check the user manual of the

device to ﬁnd out how to enable the

function.

Ensure this product is not in the pairing

mode.

This product is already connected with

another Bluetooth-enabled device. Discon-

nect that device and then try again.

Ensure the Mode is operate as "Bluetooth"

function

NOTE:

1. Simultaneous use with other devices

Failure, such as the interruption of sound, may

be caused by radio wave interference from

devices that use the same frequency band

(2.4GHz) as the turntable, including devices

with Bluetooth wireless technology, devices

using wireless LAN, digital cordless phones

and microwaves. Similarly, because radio

waves of the turntable may affect these

devices, take the following precautions:

- Install the devices using the same frequency

band (2.4GHz) away from the turntable.

2. Any device which is connected to the

turntable needs to meet the Bluetooth stand-

ards established by Bluetooth SIG and be

certiﬁed. Even if the device meets the Blue-

tooth standards, it might not connect to the

turntable or the operation method and behav-

iour may differ depending on the device's

characteristics and speciﬁcation.

Troubleshooting guide

Problem

The paired device

The Bluetooth reception is poor. Move the

connects and

device closer to this product or remove any

disconnects

obstacle between.

Ensure the length between device and

constantly.

product is not more than 10 Metre.

Some mobile phones may connect and

disconnect constantly when you make or

end calls. This does not indicate any

malfunction of this product.

For some devices, the Bluetooth connection

may be deactivated automatically as a

power-saving feature. This does not indicate

any malfunction of this product.

This model use Moving Magnet Cartridge

How-to Replacing

(ATN3600L Dual), insist upon a genuine

the new stylus

the product at Gadhouse online store

(http://www.gadhouse.com/shop).

and see tutorial page for instruction.

See the below section of Cartridge

Replacement

Strong hum on

The cable is not grounded correctly.

phono input

CARTRIDGE REPLACEMENT

1. Before replacement, put the stylus protector back on the stylus to

prevent damage to the stylus during the replacement process.

2. Carefully remove the wire leads from the original cartridge.

3. Loosen the two screws on the headshell that are securing the

cartridge and then remove the original cartridge.

4. Mount the new cartridge to the headshell and tighten it lightly. Do not

completely tighten the screws at this moment.

Troubleshooting guide