Gage Bilt GB910 Hızlı Başlangıç Kılavuzu - Sayfa 2
Araçlar Gage Bilt GB910 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Gage Bilt GB910 13 sayfaları. Hydraulic powerunit
Sayfayı Yazdır
NOTE:
Shipped with Pull pressure at 10,000 psi (68,950 kPa) & Return pressure at 6,000 psi (41,370 kPa) for
GB7624. When attaching GB585A set Pull pressure to 5,400-5,700 psi (37,350-39,300 kPa) & Return
pressure 2,200-2,400 psi (15,200-16,500 kPa). Operate Powerunit at 90-120 psi air pressure with a
minimum hose ID of 1/2".
Width.....................................................................13.0 inches................................................................................330mm
Length.....................................................................20.5 inches...............................................................................520mm
Height.....................................................................14.0 inches...............................................................................356mm
Weight (without hyd. fluid)......................................74 pounds...................................................................................33.6kg
Remote Control.................................................................................................... .....Solenoid operated Directional Valve
Motor..................................................................................................................................................3,450 RPM, 1-1/2 HP
Pump.............................................................................................2 - stage, Gear-Piston Type, 50 cu.in./min. @ 5000 psi
Output Pressure..............................................................................................................................Adjustable to 10,000 psi
Reservoir Capacity..................................................................2 gal...........................................................................006m
Operating Temperature (Ambient-min.) ................................. 0° F...........................................................................-18° C
(Hydraulic Fluid-max.) ..........................................................140° F.......................................................................... 65° C
Hydraulic Fluid: Automatic Transmission Fluid (Dexron® III or equivalent- SUS 185 100°F and SUS 50 210° F)
WARNING:
Please read this manual before
servicing or using tool. Comply
with WARNINGS and CAUTIONS to
prevent
damage to tool.
WARNING:
When operating installation equip-
ment always wear approved eye
protection .
TABLE 1
2
personal
injury or
REV. 10/13