Gage Bilt GB713 Orijinal Talimat Kılavuzu - Sayfa 13
Elektrikli Alet Gage Bilt GB713 için çevrimiçi göz atın veya pdf Orijinal Talimat Kılavuzu indirin. Gage Bilt GB713 18 sayfaları.
Ayrıca Gage Bilt GB713 için: Kurulum Kılavuzu (14 sayfalar), Orijinal Talimat Kılavuzu (20 sayfalar)
Sayfayı Yazdır
WARNING:
Disconnect tool from its power source before actuator removal or installation. Severe personal injury may
occur if power source is not disconnected.
CAUTION:
Air actuator assy can break if not careful.
CAUTION:
Do not over tighten air actuator assy. Snug tighten only.
REMOVING 704130 AIR ACTUATOR ASSY
1.
Insert a 5/8" (15.9 mm) open end box wrench around air actuator assy (704130).
2.
Loosen the air actuator assy (704130).
3.
Remove wrench. Unthread and remove the air actuator assy (704130) with fingers
from the handle assy (744129).
INSTALLING 704130 AIR ACTUATOR ASSY
1.
Apply Teflon® tape onto threads of air actuator assy (704130) one to two wraps.
2.
Thread the air actuator assy (704130) all the way into handle assy (744129) with fingers.
3.
Insert and turn 5/8" (15.9 mm) wrench and snug tight approximately 1/4-1/2 turn.
GB713
OVERHAUL
AIR ACTUATOR
13
7/11 REV 6/16