Great Lakes Biostar V Kullanım Kılavuzu - Sayfa 5

Dişçilik ekipmanları Great Lakes Biostar V için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Great Lakes Biostar V 16 sayfaları.

1. Plug one side of the electrical cord in the back

of the Biostar and the opposite end into a

three prong 110v outlet.

2. Connect the Biostar to the air source using the

high-pressure hose. Secure it in place with a

hose clamp.

Note: Route the electrical cord and pressure

hose away from the heating element.

3. The pellet cup (C) is positioned on the four

blocks of the Biostar table (A). Fill halfway

with pellets.

4. Place platform (B) onto the inner cup lip of the

pellet cup.

5. Pour pellets to half-fill the pellet drawer (D).

Slide drawer into compartment located at the

front of the machine.

6. Working pressure of 6 bar (90psi) is pre-

set in the machine. With the machine in the

"on" position, press the "CODE" button.

The current unit pressure will show on the

display. Reach behind the machine and pull

out the regulator dial and turn clockwise to

raise the pressure and counter-clockwise to

lower the pressure. The display will show the

change in pressure. When the desired pressure

is reached, push the regulator dial back into

place.

Note: Maximum pressure can only equal what

the main line is capable of supplying.