Great Little Trading Phoenix Kullanıcı Kılavuzu - Sayfa 13

İç Mekan Mobilyaları Great Little Trading Phoenix için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Great Little Trading Phoenix 15 sayfaları. Bunk bed

Sayfayı Yazdır

Converting the bunk bed to single beds

#12

STEP 1:

Take bunk beds down and revert back into

their component parts. Both the hardware

and components will need to be put together

differently to become two single beds.

For 1 x lower bunk bed end (B) use 2 x hex bolts

(#12) to cap off the insert in the top of the post

and tighten with allen key.

#12

Hardware for Step 1:

2x #12 Hex Bolts 15mm

STEP 2:

Assemble a single bed using 1 x lower bunk bed end

(A) and 1 x upper bunk bed end (B).

Install 2 x barrel nuts (#2) into 1 x side rail (C) and

then position the side rail onto 1 x upper bunk bed

end (B).

Note: Please use 1 x side rail with labels and 1 x side

rails without labels and ensure the inserts on the slat

support are facing up.

Install 2 x bolts (#1) through the bed end and secure

into the barrel nuts, tightening with the allen key.

Repeat for the other side rail.

Hardware for Step 2:

4x #2 Barrel Nut

4x #1 Hex Bolt 90mm