Agrilight AGRILED pro 16 Kullanım ve Montaj Kılavuzu - Sayfa 10

Işık Fikstürü Agrilight AGRILED pro 16 için çevrimiçi göz atın veya pdf Kullanım ve Montaj Kılavuzu indirin. Agrilight AGRILED pro 16 16 sayfaları.

8. Loosen the adjusting screw (if present) in the fixture using an Allen key 3. The adjusting screw is locate

to the right of the white two-pin plug in the slot of the aluminium plate.

9. Pull the aluminium plate out of the fixture to the edge of the power supply cable (14)

10. Check the connections of all the wires. Tighten the screws of the wire terminals if they are loose.

11. Push the aluminium plate back into the fixture to the edge of the power supply cable (15)

12. Tighten the adjusting screw (if present) in the fixture to 5 mm using an Allen key 3. Insert the eight

pin plug again and connect the power supply cable (and the DALI cable, if used) to the corresponding

terminals.

13. Fit the end caps and insert the Torx screws again.

14. Tighten the Torx screws to a torque of 1 Nm. Use a Torx 20 screwdriver.

If the fixture does not function correctly, contact your local ealer.

9 Decommissioning, Dismantling, Disposal,

Storage and Transport, Environment

•

The symbol on the product, the accessories or packaging indicates that this product must not be

treated as household waste. Dispose of the product via a collection point for the recycling of

waste electrical and electronic equipment within the EU and in other European countries that

operate separate collection systems for waste electrical and electronic equipment. By disposing

of the product in the proper manner, you help to avoid possible hazards for the environment and public

health that could otherwise be caused by improper treatment of waste equipment. The recycling of

materials contributes to the conservation of natural resources. Therefore do not dispose of your old

electrical and electronic equipment with the household waste.

•

LEDs contain electronic parts and must be handed in to the appropriate authorities.

•

Find out about the disposal possibilities in your area for the fixture at the end of its service life. Do no

throw electrical devices and parts away; check whether (parts of) the modules can be handed in, recycled

or re-used.

•

Store spare fixtures in a dry and dust-free place

We offer a warranty of five (5) years on the product. Refer to he general terms of delivery and warranty

terms for further information.