Agrilight AGRILED pro 16 Kullanım ve Montaj Kılavuzu - Sayfa 8

Işık Fikstürü Agrilight AGRILED pro 16 için çevrimiçi göz atın veya pdf Kullanım ve Montaj Kılavuzu indirin. Agrilight AGRILED pro 16 16 sayfaları.

Sayfayı Yazdır

5 Assembly and Installation

5.1

Preparation for assembly

•
Switch off the power supply before you start the installation.
•
The whole electrical installation should be carried out by a qualified electrician and in accordance with th
locally applicable laws and regulations.
1. Refer to the lighting plan.
2. Remove the AGRILED
Place the fixture down with the glass cover facing upwards to avoid damage to the glass
cover.
3. Choose installation with chains or with brackets.
The mounting system must be ordered separately from Agrilight and is not supplied as
standard with the product.
5.2

Install brackets

Installation with mounting brackets
1. Fit the bolt, washer and nut into the angle bracket (3).
2. Fasten the angle bracket to the right-hand part (4).
3. If necessary, increase the length of the right-hand part by using a further right-hand part (5).
Ensure that the two slots are always facing downwards.
4. Place a second angle bracket (4) on the front side of the right-hand part. The mounting bracket can now
be fastened to the ceiling.
5. Repeat the above steps for the second bracket.
Installation with chains
1. Fit the bolt, washer and nut into the angle bracket (3).
2. Fasten the angle bracket to the right-hand part (6).
Position the right-hand part so that the protruding parts of the plate are on the underside.
3. Repeat the above steps for the second bracket.
4. Hook the chains (not supplied) into the eyes of the bracket.
5. Fasten the chains to the ceiling.
5.3

Assembling and installing the AGRILED

1. Push the selected mounting into the mounting rails of the fixture (7)
2. Attach the fixture to the mounting system
Never install the fixture vertically. This could result in damage to the fixtur
Tip! Use the integral spirit level to adjust the fixture so that it is level
The fixture can be operated by means of a switch of a light man gement system.
•
Connect the connecting cable to the electrical installation:
Colour coding
Wiring colours
in the EU
Wiring colours
in the US/CA
8
pro 16 from the packaging and check the contents (2).
®
White light
Neutral
brown (L2)
blue (N)
black (L2)
white (N)
pro 16
®
Earth
yellow/green (PE)
green (PE)