GREAT PLANES avistar elite Kullanım Kılavuzu - Sayfa 4
Oyuncak GREAT PLANES avistar elite için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. GREAT PLANES avistar elite 20 sayfaları.
Sayfayı Yazdır
Optional Supplies and Tools
Here is a list of optional supplies and tools that are useful for
maintaining the Avistar Elite.
❍ CA applicator tips (HCAR3780)
❍ CA debonder (GPMR6039)
❍ Pro 6-minute epoxy (GPMR6045)
❍ Epoxy brushes (6, GPMR8060)
❍ Mixing sticks (50, GPMR8055)
❍ Mixing cups (GPMR8056)
❍ Curved-tip canopy scissors for trimming plastic parts
(HCAR0667)
❍ Hobbico High Precision Diagonal Cutter 5"
(HCAR0630)
❍ Pliers with wire cutter (HCAR0625)
❍ Robart Super Stand II (ROBP1402)
❍ 12"
18" [300
460mm] Builder's Cutting Mat
(HCAR0454)
❍ 18"
24" [460
610mm] Builder's Cutting Mat
(HCAR0455)
❍ 24"
36" [460
910mm] Builder's Cutting Mat
(HCAR0456)
❍ T.A. Emerald Performance Duster Compressed Air 10
oz (TAEC1060)
❍ Panel Line Pen (TOPQ2510)
❍ Servo horn drill (HCAR0698)
❍ Hobby Heat
™
micro torch (HCAR0755)
❍ AccuThrow
™
Defl ection Gauge (GPMR2405)
❍ CG Machine
™
(GPMR2400)
❍ Great Planes Clevis Installation Tool (GPMR8030)
❍ Great Planes 4-In-1 Installation Tool (GPMR8035)
❍ Precision Magnetic Prop Balancer (TOPQ5700)
Building Stand
A building stand or cradle comes in handy during the build.
We use the Robart Super Stand II (ROBP1402) for all our
projects in R&D.
IMPORTANT BUILDING NOTES
● Photos and sketches are placed before the step they refer
to. Frequently you can study photos in following steps to
get another view of the same parts.
● The Avistar Elite RTF is factory-covered with Top Flite
®
MonoKote
fi lm. Should repairs ever be required, MonoKote
can be patched with additional MonoKote purchased
separately. MonoKote is packaged in six-foot rolls, but
some hobby shops also sell it by the foot. If only a small
piece of MonoKote is needed for a minor patch, perhaps a
fellow modeler would give you some. MonoKote is applied
with a model airplane covering iron, but in an emergency a
regular iron could be used. A roll of MonoKote includes full
instructions for application. Following are the colors used
on this model and order numbers for six foot rolls.
Orange TOPQ0202
Missile Red TOPQ0201
● The stabilizer and wing incidences and engine thrust angles
have been factory-built into this model. However, some
technically-minded modelers may wish to check these
measurements anyway. To view this information visit the
web site at www.hobbico.com and click on "Technical Data."
Due to manufacturing tolerances which will have little or no
effect on the way your model will fl y, please expect slight
deviations between your model and the published values.
KIT INSPECTION
Before starting to build, take an inventory of this kit to make
sure it is complete, and inspect the parts to make sure they
are of acceptable quality. If any parts are missing or are not
of acceptable quality, or if you need assistance with assembly,
contact Product Support. When reporting defective or missing
parts, use the part names exactly as they are written in the
Kit Contents list on this page.
Hobbico Product Support
3002 N Apollo Drive Suite 1
Champaign, IL 61822
E-mail: [email protected]
ORDERING REPLACEMENT PARTS
Replacement parts for the Hobbico Avistar Elite RTF are
available using the order numbers in the Replacement Parts
List that follows. The fastest, most economical service can be
provided by your hobby dealer or mail-order company.
To locate a hobby dealer, visit the Hobbico web site at www.
hobbico.com. Choose "Where to Buy" at the bottom of the menu
on the left side of the page. Follow the instructions provided
on the page to locate a U.S., Canadian or International dealer.
Parts may also be ordered directly from Hobby Services by
calling (217) 398-0007, or via facsimile at (217) 398-7721, but
full retail prices and shipping and handling charges will apply.
Illinois and Nevada residents will also be charged sales tax. If
4
Royal Blue TOPQ0221
Jet White TOPQ0204
Ph: (217) 398-8970 ext. 5
Fax: (217) 398-7721
®