GREAT PLANES Combat Corsair Kullanım Kılavuzu - Sayfa 4
Oyuncak GREAT PLANES Combat Corsair için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. GREAT PLANES Combat Corsair 20 sayfaları. 1/12 scale ama event 750, class 2610 arf
Sayfayı Yazdır
IMPORTANT BUILDING NOTES
• When you see the term test fit in the instructions, it means
that you should first position the part on the assembly
without using any glue, then slightly modify or custom fit
the part as necessary for the best fit.
• Whenever the term glue is written you should rely upon
your experience to decide what type of glue to use. When
a specific type of adhesive works best for that step, the
instructions will make a recommendation.
• Whenever just epoxy is specified you may use either 30-
minute (or 45-minute) epoxy or 6-minute epoxy. When 30-
minute epoxy is specified it is highly recommended that
you use only 30-minute (or 45-minute) epoxy, because you
will need the working time and/or the additional strength.
• Photos and sketches are placed before the step they
refer to. Frequently you can study photos in following steps
to get another view of the same parts.
Replacement parts for the Great Planes 1/12 Combat Corsair
ARF are available using the order numbers in the
Replacement Parts List that follows. The fastest, most
economical service can be provided by your hobby dealer or
mail-order company.
To locate a hobby dealer, visit the Great Planes web site at
www.greatplanes.com . Choose "Where to Buy" at the
bottom of the menu on the left side of the page. Follow the
instructions provided on the page to locate a U.S., Canadian
or International dealer. If a hobby shop is not available,
replacement parts may also be ordered from Tower
Hobbies
®
at www.towerhobbies.com, or by calling toll free
(800) 637-6050.
Parts may also be ordered directly from Hobby Services by
calling (217) 398-0007, or via facsimile at (217) 398-7721,
but full retail prices and shipping and handling charges will
apply. Illinois and Nevada residents will also be charged
Order Number
GPMA2610............Fuselage Set
GPMA2611............Wing Set
GPMA2612............Tail Set
GPMA2613............Canopy
GPMA2614............Cowl
GPMA2615............Decal Sheet
ORDERING REPLACEMENT PARTS
Replacement Parts List
Description
Missing pieces ................................................Contact Product Support
Instruction manual...........................................Contact Product Support
Full-size plans .................................................Not available
Kit parts listed below.......................................Hobby Supplier
• The stabilizer and wing incidences and engine thrust
angles have been factory-built into this model. However,
some technically-minded modelers may wish to check
these measurements anyway. To view this information visit
the web site at www.greatplanes.com and click on
"Technical Data." Due to manufacturing tolerances which
will have little or no effect on the way your model will fly,
please expect slight deviations between your model and
the published values.
COMMON ABBREVIATIONS
Fuse = Fuselage
Stab = Horizontal Stabilizer
Fin = Vertical Fin
LE = Leading Edge
TE = Trailing Edge
LG = Landing Gear
Ply = Plywood
mm = Millimeters
SHCS = Socket Head Cap Screw
sales tax. If ordering via fax, include a Visa
number and expiration date for payment.
Mail parts orders and payments by personal check to:
Hobby Services
3002 N Apollo Drive, Suite 1
Champaign IL 61822
Be certain to specify the order number exactly as listed in
the Replacement Parts List. Payment by credit card or
personal check only; no C.O.D.
If additional assistance is required for any reason contact
Product Support by e-mail at:
or by telephone at (217) 398-8970.
How to Purchase
4
" = Inches
®
or MasterCard
®