Aircraft in Miniature Limited Historic Wings Wright Flyer 1 1903 Montaj Talimatları Kılavuzu - Sayfa 5
Oyuncak Aircraft in Miniature Limited Historic Wings Wright Flyer 1 1903 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Aircraft in Miniature Limited Historic Wings Wright Flyer 1 1903 8 sayfaları. 1:72 metal kit
Sayfayı Yazdır
4
Assemble the rudders (Refer to Figure 4 )
A Fold the rudder structure (Refer to Figure 4, Detail A)
NOTE - The fold lines are on the lower face before the item is folded, so they are inside the
structure after it is folded.
B
Attach the six rudder struts (R2), and the rudder mounting (R3).
R2
Rudder Strut
(x 6)
Cover each side of
each rudder with
tissue paper
(if desired)
5
Assemble the Elevators (Refer to Figure 4)
A Assemble the components.
(1) Turn the ribs of the first elevator through 90 degrees.
(a) Turn the ribs.
1
2
E2 Elevator spar
3
can only see the ribs.
4
(b) Attach the spar (E2) below the ribs of the elevator.
(2) Do steps (1)(a)1 thru (1)(b) for the second elevator.
Clamp the leading edge of one elevator (E1) so that you can only see the ribs.
Twist each rib through 90 degrees, adjacent to the clamp.
Figure 4
Remove the leading edge from the clamp, and then clamp the trailing edge so that you
If necessary, remove any ripples in the ribs, so that each rib is flat, and parallel to the
adjacent ribs.
R1 - Rudder Structure
R3
Rudder Mounting
Figure 3
Fold
DETAIL A
E1 Elevator
Fold