Automated environmental systems SMS-DIALLER Kurulum ve Çalıştırma

Güvenlik Sistemi Automated environmental systems SMS-DIALLER için çevrimiçi göz atın veya pdf Kurulum ve Çalıştırma indirin. Automated environmental systems SMS-DIALLER 8 sayfaları. Sms alarm

Sayfayı Yazdır

Helpline Telephone: 01842 819130

AUTOMATED

SYSTEMS™

SMS-DIALLER

Installation and Operation manual - SMS Alarm

ENVIRONMENTAL

Setup and operation is performed by simple SMS text messages including

adding and removing user telephone numbers. A complete list of accepted

telephone numbers can be viewed via SMS text message. The memory can

also be scanned to see if it contains an individual number and the result is

displayed by the on-board LED and by SMS text message.

Connect the float switch to the sensor inputs in the alarm panel (please refer to

the float switch manufactures wiring diagram to select the correct wire colours

and polarity required to make the float switch make contact when in the up

position.

Connect the alarm panel to a 230VAC supply as shown.

Test the alarm panel is working by holding the float switch in the up position for

5 seconds.

Please note that the "test" button must be pressed for 5 seconds before the

alarm will trigger.

Further information is available on www.automatedenvironmentalsystems.co.uk