GReddy Turbo Kit Kurulum Kılavuzu - Sayfa 14

Otomobil Aksesuarları GReddy Turbo Kit için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. GReddy Turbo Kit 18 sayfaları. 96-98 nissan 240sx s14 (ka24de) td06-20g 8cm2
Ayrıca GReddy Turbo Kit için: Kurulum Kılavuzu (13 sayfalar), Kurulum Kılavuzu (18 sayfalar)

Sayfayı Yazdır

4. Assemble the Airinx back together and hand

tight the top screw.

5. Remove the factory Airflow meter off from the

air cleaner box and install the Airflow mete to

the provided air flow meter adapter. Install the

Airinx and the adapter to suction Pipe S-1.

* The O-ring on the Airflow meter will be reused.

Apply some grease on the O-ring on the Airflow

meter, and make sure not to damage when

installing.

(Parts Used #14, 17, 38, 42, 43, 62)

6. Secure the Airinx with the provided bracket and

connect the Airflow meter connector.

7. Connect the air hose from the Metering Oil

Pump to suction pipe S-1.

Do not mistake this for the Jet Air Fuel Mixing hose.

8. Connect the Engine by pass hose on the Oil

filler pipe to the suction pipe S-1

Do not mistake this for the Jet Air Fuel Mixing hose.

3-7 Air Pump and Exhaust Installation

1. Install the provided Air Pump Hose to the factory AIR control valve and install the valve

back to the original location. And route the Air Pump Hose over the turbocharger.

*Use the factory gasket and bolts.

(Parts Used #18)

(Parts Used #31)

FLOW

(Parts Used #20)

Airflow

Sensor

Attachment