GReddy Turbo Kit 설치 매뉴얼 - 페이지 14

{카테고리_이름} GReddy Turbo Kit에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GReddy Turbo Kit 18 페이지. 96-98 nissan 240sx s14 (ka24de) td06-20g 8cm2
GReddy Turbo Kit에 대해서도 마찬가지입니다: 설치 매뉴얼 (13 페이지), 설치 매뉴얼 (18 페이지)

페이지 인쇄

4. Assemble the Airinx back together and hand

tight the top screw.

5. Remove the factory Airflow meter off from the

air cleaner box and install the Airflow mete to

the provided air flow meter adapter. Install the

Airinx and the adapter to suction Pipe S-1.

* The O-ring on the Airflow meter will be reused.

Apply some grease on the O-ring on the Airflow

meter, and make sure not to damage when

installing.

(Parts Used #14, 17, 38, 42, 43, 62)

6. Secure the Airinx with the provided bracket and

connect the Airflow meter connector.

7. Connect the air hose from the Metering Oil

Pump to suction pipe S-1.

Do not mistake this for the Jet Air Fuel Mixing hose.

8. Connect the Engine by pass hose on the Oil

filler pipe to the suction pipe S-1

Do not mistake this for the Jet Air Fuel Mixing hose.

3-7 Air Pump and Exhaust Installation

1. Install the provided Air Pump Hose to the factory AIR control valve and install the valve

back to the original location. And route the Air Pump Hose over the turbocharger.

*Use the factory gasket and bolts.

(Parts Used #18)

(Parts Used #31)

FLOW

(Parts Used #20)

Airflow

Sensor

Attachment