Gainlab Audio DICTATOR GLA-TC1 Kalibrasyon Kılavuzu - Sayfa 10

Kayıt Ekipmanları Gainlab Audio DICTATOR GLA-TC1 için çevrimiçi göz atın veya pdf Kalibrasyon Kılavuzu indirin. Gainlab Audio DICTATOR GLA-TC1 18 sayfaları.

Sayfayı Yazdır

Now go back to 3.3 and check if in Bypass mode you still measure 0V in between TP4 and TP5.

Most likely it will stay as you set up earlier. Repeat 3.3 and 3.4 if needed.

STEP - LEVELLING

Starting point:

Input signal: +0dBu 1kHz sinewave, on both channels

Mode-HiComp, Meter- Output meter, Threshold

Switch positions:

minimum (full left), UNLINK

Measurement process: Adjust: VR1

Target: to measure +0.05dBu on the left output of the unit (not the

VU meter!)

Adjust: VR2

Target: to measure +0.05dBu on the right output of the unit

(not the VU meter!)

Error margin: 0.1dBu