Gainlab Audio DICTATOR GLA-TC1 Kalibratiehandleiding - Pagina 10

Blader online of download pdf Kalibratiehandleiding voor {categorie_naam} Gainlab Audio DICTATOR GLA-TC1. Gainlab Audio DICTATOR GLA-TC1 18 pagina's.

Now go back to 3.3 and check if in Bypass mode you still measure 0V in between TP4 and TP5.

Most likely it will stay as you set up earlier. Repeat 3.3 and 3.4 if needed.

STEP - LEVELLING

Starting point:

Input signal: +0dBu 1kHz sinewave, on both channels

Mode-HiComp, Meter- Output meter, Threshold

Switch positions:

minimum (full left), UNLINK

Measurement process: Adjust: VR1

Target: to measure +0.05dBu on the left output of the unit (not the

VU meter!)

Adjust: VR2

Target: to measure +0.05dBu on the right output of the unit

(not the VU meter!)

Error margin: 0.1dBu