DB Drive EUPHORIA EDSP4-31BT Kullanıcı Kılavuzu - Sayfa 9
Kayıt Ekipmanları DB Drive EUPHORIA EDSP4-31BT için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DB Drive EUPHORIA EDSP4-31BT 15 sayfaları. 31 band digital sound processor with built-in amplifier
Sayfayı Yazdır
Figure 3.6.4
Step 2: Beneath each channel number is a drop-down
button. Click on the button then select the output type being
used for each specific channel.
The options for output configuration will be determined by
what the user has selected for currently assigned channels
in the signal path. If a desired option is greyed out, then
check any previously configured channels and ensure
appropriate output types are set.
Front » Left, Right » High / Mid / Low / Mid-High / Mid-Low / & Full Frequency
Rear » Left, Right » High / Low / & Full Frequency
Center » High-Frequency, Low Frequency & Full Frequency
Subwoofer » Subwoofer Right, Subwoofer Left
Step 3: After the user has selected all the output signal
paths, click the "Lock Output" button to lock the channel
output configurations and preven accidental changes.
16
3.7 Output Delay Adjustments
The Output Delay Adjustments area is located left of the Output
Channel Configuration area. To make adjustments to delay
settings select the desired channel in the Output Channel
Configuration area then input a value for the delay to be added
to the corresponding speaker.
3.8 Signal Equalizer Adjustments
Changes to the equalizer settings can be made in the Crossover
& Equalizer Adjustments area located above the Output Channel
Configuration & Output Delay Adjustments areas, as shown
below:
Figure 3..8.1
Adjustments: The EDSP4-31BT GUI allows the user to easily
make changes. Use your cursor to drag the slider of the
desired frequency band up or down. Whenever the parametric
equalizer curve is available, each corresponding input
parameter value will be adjusted in real time.
17