DB Drive EUPHORIA EDSP4-31BT 사용자 설명서 - 페이지 9

{카테고리_이름} DB Drive EUPHORIA EDSP4-31BT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DB Drive EUPHORIA EDSP4-31BT 15 페이지. 31 band digital sound processor with built-in amplifier

페이지 인쇄

Figure 3.6.4

Step 2: Beneath each channel number is a drop-down

button. Click on the button then select the output type being

used for each specific channel.

The options for output configuration will be determined by

what the user has selected for currently assigned channels

in the signal path. If a desired option is greyed out, then

check any previously configured channels and ensure

appropriate output types are set.

Front » Left, Right » High / Mid / Low / Mid-High / Mid-Low / & Full Frequency

Rear » Left, Right » High / Low / & Full Frequency

Center » High-Frequency, Low Frequency & Full Frequency

Subwoofer » Subwoofer Right, Subwoofer Left

Step 3: After the user has selected all the output signal

paths, click the "Lock Output" button to lock the channel

output configurations and preven accidental changes.

3.7 Output Delay Adjustments

The Output Delay Adjustments area is located left of the Output

Channel Configuration area. To make adjustments to delay

settings select the desired channel in the Output Channel

Configuration area then input a value for the delay to be added

to the corresponding speaker.

3.8 Signal Equalizer Adjustments

Changes to the equalizer settings can be made in the Crossover

& Equalizer Adjustments area located above the Output Channel

Configuration & Output Delay Adjustments areas, as shown

below:

Figure 3..8.1

Adjustments: The EDSP4-31BT GUI allows the user to easily

make changes. Use your cursor to drag the slider of the

desired frequency band up or down. Whenever the parametric

equalizer curve is available, each corresponding input

parameter value will be adjusted in real time.