CellarCool ADDENDUM CM Series Hızlı Başlangıç Kılavuzu - Sayfa 8

Şarap Soğutucu CellarCool ADDENDUM CM Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. CellarCool ADDENDUM CM Series 12 sayfaları.

Sayfayı Yazdır

INSULATION BLANKET INSTALLATION

An external Insulation Blanket is included with the purchase of each Ceiling Mount. It is mandatory that the insulation blanket
be installed on the exterior of the Ceiling Mount unit prior to unit installation in the ceiling.
•
Ceiling Mount evaporator dimensions (including insulation blanket): 36.25"L x 15"W x 13"H.
•
CellarCool recommends constructing the frame using dimensions which include the insulation blanket to ensure
proper fitment.
*Tools required: spray adhesive, utility knife, cork tape, foil tape
Mini Ceiling Mount blanket dimensions
Insulation Blanket
11.25"
1. Once mounting bracket location has been selected and installed, proceed to the insulation blanket installation.
2. Spray adhesive onto the sides of the portions of the evaporator unit and mounting bracket which protrude into
the attic. See spray adhesive directions for proper tack time before proceeding to step 3 (see illustration).
3. Wrap insulation piece (A) around the sides of the evaporator unit. Make sure the bottom edge of the insulation is
flush with the top edge of the mounting bracket (see illustration).
A
4.
Set insulation in place by pressing firmly on all surfaces of the insulation that come in contact with the sides of the
evaporator unit (see illustration).
5. Using a utility knife, cut holes in the insulation for the line set,
wiring, and drain line if needed.
6. If necessary, cut the insulation to size using the top edge of the
Page 6 | 1-855-235-5271
68"
11"
A
H
14.25"
H
22"
Insulation Blanket
B
Ceiling Mount blanket dimensions
102"
Insulation Blanket
A
H
If needed, trim excess insulation around all edges.
A
A
H
35.75"
Insulation Blanket
14.25"
B
A
02062020
CCM