ADENDORFF MAC AFRIC SWRENC-001 Orijinal Kullanım Talimatları - Sayfa 9
Elektrikli Alet ADENDORFF MAC AFRIC SWRENC-001 için çevrimiçi göz atın veya pdf Orijinal Kullanım Talimatları indirin. ADENDORFF MAC AFRIC SWRENC-001 11 sayfaları.
Sayfayı Yazdır
USE CASE
CAUTION:
Accessories mentioned in the following figure and user manual are not offered with tool.
For those threads that have special demand for torque, use torque wrench to check the
real torque. If the tool cannot meet the demand, do not use or there will be the danger of
personal injuries.
Dust caused during operation may contain poisonous material. Operate the tool in a
well-ventilated working environment and always wear protective devices to reduce harm
to operator.
For different operating demands, many accessories can be installed on the tool. Refer to
following figure for choosing accessories:
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and the battery is removed before attempting to
perform inspection or maintenance.
Cleaning Ventilation Slots
For safe and proper working, always keep the power tool and its ventilation slots clean. Use a soft,
clean and dry brush to clean the ventilation slots regularly or when they're clogged.
Inspecting the Mounting Screws
Regularly inspect all mounting screws and ensure that they are properly tightened. Should any of
the screws be loose, retighten them immediately. Failure to do so could result in serious hazard.
Cleaning
Only use soft and dry cloth to wipe the body of the tool. Do not clean the tool with wet cloth,
thinner, gasoline or other volatile solvents.
Lubricating
Add lubricating grease to the inner gear housing and drive spindle for slower wear and better
performance of the tool.
Cleaning Charger Base
Cut off power supply and pull out the battery before cleaning. Use dry cloth to clear dirty and
grease on the charger base. Do not wash it with water or detergent.
※ To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment
should be performed by authorized service centers, always using original replacement parts.