dBTechnologies DVA MINI G2 Hızlı Başlangıç Kullanım Kılavuzu - Sayfa 2
Hoparlör Sistemi dBTechnologies DVA MINI G2 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kullanım Kılavuzu indirin. dBTechnologies DVA MINI G2 7 sayfaları.
Sayfayı Yazdır
Thank you for choosing a dBTechnologies Product!
DVA MINI G2 is an active line array module, equipped with two 0.75" exit neodymium compression driver (1" voice
coil) and two 6.5" neodymium woofers (1.75" voice coil). The full-range acoustical design includes integrated horns
and double phase plugs, in order to reach the best coherence in line-array configuration. The mechanical design
allows an easy, accurate and quick installation in flown or stack use (3 points fast rigging system). The powerful
DIGIPRO®
G3 amplifier section, capable of handling up to 400 W (RMS power), is controlled by a DSP, which can
perform a detailed customization of the output sound of the speaker. In particular, thanks to the DSP rotary interface,
it is possible to accurately tune the line-array configuration coverage, taking advantage of FIR filter technology. In
addition, the integrated RDNET connections are useful for a remote in-depth line-array control and configuration
(dBTechnologies COMPOSER and AURORA NET softwares).
Check the site
www.dbtechnologies.com
user manual!
I) Unpacking
The box contains:
N°1 DVA MINI G2
N°1 100-120 V FUSE
This quick start and warranty documentation
II) Easy installation
DVA
MINI
G2
can
configurations (flown or stacked), thanks to the 3
points fast rigging system and a complete set of
professional accessories (not included, see chapter III).
Please note that for the mechanical safety check the
software dBTechnologies Composer software must be
used (see also chapter V).
A – upper bracket (with hole)
B – upper bracket (with integrated pin)
The B bracket is equipped with a SAFETY LOCK (see
the detail in the side picture).
DVA MINI G2
www.dbtechnologies.com
for the complete
be
installed
in
different
C – lower bracket (with hole)
D – lower bracket (with integrated pin)
E – rear bracket with joint and quick release pin
F – audio/network I/O and control section
G – power supply amplifier section
The E rear bracket shows the admitted tilted angles
between line-array modules.
2
info@dbtechnologies‐aeb.com
Rev 1.0 cod. 420120326Q