dBTechnologies DVA MINI G2 Hızlı Başlangıç Kullanım Kılavuzu - Sayfa 3
Hoparlör Sistemi dBTechnologies DVA MINI G2 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kullanım Kılavuzu indirin. dBTechnologies DVA MINI G2 7 sayfaları.
Sayfayı Yazdır
FRONT SIDE MOUNTING
Put two DVA MINI G2 modules (X, Y) one on top of
the other. On the front side, the integrated pin of D
bracket must be inserted in the hole of the A one, as
shown below.
The same happens with the integrated pin of B,
which is inserted in the hole of C bracket.
Please note that the SAFETY LOCK, once it is
necessary to disassemble two modules, must be
pulled up to unlock them.
REAR SIDE MOUNTING
Extract the rear pin from the PIN HOLDER position in
E bracket (in both the X, Y modules).
Choose the desired tilt angle among the admitted
ones, shown in the side picture.
Insert the joint of Y module, aligning the desired
hole, in the E bracket of the X module.
Insert the pin as shown in the example to lock this
position.
The upper point of the joint displays the final angle
tilt as illustrated.
DVA MINI G2
www.dbtechnologies.com
CHECK PERIODICALLY THE INTEGRITY AND THE
FUNCTIONALITY OF THE ENCLOSURE, OF THE
PINS AND OF THE BRACKETS, FOR A SAFE
INSTALLATION. MAKE SURE THAT THE PINS SECURE
PROPERLY THE MODULES AND THAT THEY ARE FULLY
LOCKED.
3
info@dbtechnologies‐aeb.com
Rev 1.0 cod. 420120326Q