Autonics LE4S Series Manuel - Sayfa 4

Zamanlayıcı Autonics LE4S Series için çevrimiçi göz atın veya pdf Manuel indirin. Autonics LE4S Series 6 sayfaları. Lcd digital timers
Ayrıca Autonics LE4S Series için: Talimatlar (18 sayfalar), Manuel (17 sayfalar)

Sayfayı Yazdır
Autonics LE4S Series Manuel

Output Operation Mode

■ LE4S
The timing charts are under the supplying power.
Initial status: UP mode - display value 0, output OFF
DOWN mode - displays the setting time, output OFF
• T, T.on, T.off : setting time / T.out : One-shot output time (range: 0.01 to 99.99 sec)
• T.on, T.off : individual setting available
• T, T.on, T.off ＞ Ta
• T = T1 + T2 / T = Ta + Tb + Tc
OND
T
POWER
START
RESET
①
RELAY OUT
Setting time
UP
0
Setting time
DOWN
0
1. START signal: time starts during ON state
2. Position ① - progressing time = setting time →
Output: ON, display value: Hold
3. Position ② - RESET signal: ON → Display value and output:
return to the initial status
4. Position ③ - START signal: ON → RESET signal: OFF, starting the
operation of no. 1
5. Position ④ - START signal: OFF → Display value and output:
return to the initial status
OND.1
T
POWER
START
RESET
①
RELAY OUT
Setting time
UP
0
Setting time
DOWN
0
1. START signal: ON → Time starts
2. Position ① - progressing time = setting time →
Output: ON, display value: Hold
3. Position ② - Recognizes the first START signal
4. Position ③ - RESET signal: ON → Display value and output:
return to the initial status
OND.2
T
T
POWER
START
RESET
RELAY OUT
①
Setting time
UP
0
Setting time
DOWN
0
1. START signal: ON → Time starts
2. Position ① - progressing time = setting time →
Output: ON (during T.out) and OFF,
display value: Hold
3. RESET signal: ON → Display value and output: return to the
initial status
4. Position ② - START signal: ON during progressing the time,
Progressing time: return to the initial status and
progress again.
FLK
T.off
T.on
T.off
Ta
POWER
START
RESET
RELAY OUT
T.off
T.on
UP
0
T.off
T.on
DOWN
0
1. START signal: ON during the output: repeating OFF (during T.off ),
ON (during T.on)
2. RESET signal: ON → Display value and output: return to the
initial status
3. START signal: ON status, RESET signal: OFF → Starts the
operation of no. 1
4. START signal: OFF → Display value and output: return to the
initial status
FLK.1
T.on
T.off
T.on
T.off
POWER
START
①
RESET
RELAY OUT
T.off
T.on
UP
0
T.off
T.on
DOWN
0
1. START signal: ON → Output: repeating ON (during T.on),
OFF (during T.off)
2. Position ① - Recognizes the first START signal
3. RESET signal: ON → Display value and output: return to the
initial status. But, when the START signal is
ON, progress again.
T
Ta
T
②
③
POWER
START
RELAY OUT
T
Ta
T
②
③
POWER
RESET
START
RELAY OUT
Ta
Ta
T
②
POWER
START
RELAY OUT
T.off
Ta
T.off
T.on
Ta
T.off
POWER
START
RELAY OUT
Ta
T.on
T.off
Ta
T.on
Ta
POWER
START
RELAY OUT
INT
POWER
START
RESET
RELAY OUT
Setting time
UP
0
Setting time
DOWN
0
1. START signal: ON, instantly output: ON and time starts
2. Progressing time = setting time → Output: OFF,
3. Position ① - RESET signal: ON → Display value and output:
4. START signal: ON status, RESET signal: OFF →
5. Position ② - START signal: OFF → Display value and output:
④
INT.1
POWER
START
RESET
RELAY OUT
Setting time
UP
0
T
Setting time
DOWN
0
1. START signal: ON, instantly output: ON and time starts
2. Progressing time = setting time → Output: OFF,
3. Position ① - Recognizes the first START signal
4. Progressing time = setting time → START signal: ON, instantly
5. Position ② - RESET signal: ON → Display value and output:
NFD
POWER
START
RESET
RELAY OUT
ON Delay
Setting time
OFF Delay
UP
0
T
ON Delay
Setting time
OFF Delay
DOWN
0
1. START signal: ON → Output: ON (during T.on) - ON Delay,
START signal: OFF → Output: OFF (during T.off) - OFF Delay
2. Position ① - START signal: repeatedly input (within the setting
time) → Output: ON, display value: return to initial
3. Position ② - RESET signal: ON → Display value and output:
return to the initial status
START signal: ON status, RESET signal: OFF →
ON Delay
NFD.1
POWER
START
RESET
RELAY OUT
ON Delay
T.out
Setting time
T
OFF Delay
UP
0
ON Delay
Setting time
OFF Delay
DOWN
0
1. START signal: ON → Time starts,
Progressing time = T.on → Output: ON (ON Delay),
T.on
START signal: OFF → T.off: output ON (OFF Delay)
2. Position ① - START signal: ON → OFF (within the setting time)
→ Output: ON, display value: return to initial status
START signal: OFF → ON (within the setting time)
→ Output: OFF, display value: return to initial status
3. Position ②: RESET signal: ON → Display value and output:
return to the initial status
START signal: ON status, RESET signal: OFF →
ON Delay
OFD
POWER
START
T .off T .onT .off T .on
RESET
RELAY OUT
Setting time
UP
0
Setting time
T.on
DOWN
0
1. START signal: ON → Output: maintains ON state
2. START signal: OFF → Time starts
Progressing time = setting time → Output: OFF,
3. RESET signal: ON → Display value and output: return to the
T.on T.off T.on
T
T
①
display value: Hold
return to the initial status
Starts the operation of no. 1
return to the initial status
T
Ta
T
①
display value: Hold
output: ON, initializing time and progress
return to the initial status
T.on
T.off
Ta Ta
T.off
Ta
①
status
T.on
T.off
Ta Ta
T.off
Ta
①
T
Ta
Ta
display value: Hold
initial status
Ta
T
②
POWER
START
T
RELAY OUT
T
T
②
POWER
START
T
T
RELAY OUT
T.on
Ta
T.on
T.off
②
POWER
START
T.on
T.off
RELAY OUT
T.on
Ta
T.on
T.off
②
POWER
START
T.on
T.off
RELAY OUT
T
Ta
POWER
START
T
RELAY OUT