dynarex Bari+Max DB300 Kullanıcı Kılavuzu - Sayfa 3
Tıbbi Ekipman dynarex Bari+Max DB300 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dynarex Bari+Max DB300 20 sayfaları. Bariatric hd long-term care bed
Sayfayı Yazdır
DECLARATION – ELECTROMAGNETIC EMISSIONS
Radio Frequency Interference (RFI) influences most electronic
equipment. Caution should be exercised regarding the use of
portable communications equipment in the area around such
equipment. If RFI causes erratic behavior, shut the bed off
Information about Electromagnetic Emissions
Guidance and Manufacturer's Declaration - Electromagnetic Emissions
The care bed is intended for use in the electromagnetic environment specified below. The customer or user of the care
bed should ensure that it is used in such an environment.
Emitted interference
RF emissions according to CISPR11
RF emissions according to CISPR11
Emissions of harmonics according to
CISPR11
Emissions of voltage fluctuations/Flick-
er according to IEC 61000-3-3
Information about Electromagnetic Interference Immunity
Guidance and Manufacturer's Declarations - Electromagnetic Interference Immunity
The care bed is intended for use in the electromagnetic environment specified below. The customer or user of the care
bed should ensure that it is used in such an environment.
Interference Immunity
Certification
Electrostatic Discharge (ESD)
according to IEC 61000-4-2
Electrical Fast Transients/Bursts
according to IEC 61000-4-4
Surges according to IEC 61000-
4-5
RF emissions according to
CISPR11
Bariatric Heavy Duty Long-Term Care Bed • DB300 • 5 Function Low Bed • Expands to 48" (Reorder No. 12013)
Compliance
Group 1
Class B
Class A
Complies
IEC 60601 Test Level
± 6 kV Contact discharge
± 8 kV Air discharge
± 2 kV For power lines
± 1 kV for input and out-
put lines
± 1 Kv Voltage phase-
phase conductor
1 Kv Voltage phase-
ground conductor
Class B
immediately. Leave it off while the transmission is in progress.
Interference to electronic equipment may occur
in the vicinity of devices marked with this symbol:
Electromagnetic Environment - Guidelines
The care bed uses RF energy only for its inter-
nal functioning. Therefore the RF emissions are
very low and it is unlikely that nearby electronic
devices will be disturbed.
The care bed is designed for use in all estab-
lishments including domestic establishments
and those determined to be directly connect-
ed to a public supply network that supplies
buildings used for residential purposes.
Compliance Level
± 6 kV Contact discharge
± 8 kV Air discharge
± 2 kV For power lines
± 1 kV For input and output
lines
± 1 Kv Voltage phase-phase
conductor
1 Kv Voltage phase-ground
conductor
Electromagnetic Environ-
ment - Guidelines
Floors should be wood, con-
crete or ceramic tile floors.
If the floor is covered with
synthetic material, the rela-
tive humidity should be at
least 30%.
The quality of the supply
voltage should be equivalent
to that of a typical business or
hospital environment.
The quality of the supply
voltage should be equivalent
to that of a typical business or
hospital environment.
The care bed is designed
for use in all establishments
including domestic establish-
ments and those determined
to be directly connected to a
public supply.
3