dynarex Bari+Max DB300 Kullanıcı Kılavuzu - Sayfa 5
Tıbbi Ekipman dynarex Bari+Max DB300 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dynarex Bari+Max DB300 20 sayfaları. Bariatric hd long-term care bed
Sayfayı Yazdır
DECLARATION – ELECTROMAGNETIC EMISSIONS
Working Clearances
Recommended working clearances between portable and mobile RF communications equipment and the care bed
The care bed is intended for use in the electromagnetic environment in which radiated RF disturbances are controlled.
The customer or user of the care bed can help to prevent electromagnetic interference by maintaining a minimum dis-
tance between portable and mobile RF communications equipment (transmitters) and the care bed as recommended
below, according to the maximum output power of the communication device.
Output Power of Transmitter
in Watts (W)
0.01
0.1
1
10
100
For transmitters not rated in the list above, the working clearance can be determined using the equation, which belongs to
the transmitter, where P is the nominal output of the transmitter in Watts (W) according to specifications of the transmitter
manufacturer.
Note 1: An additional factor of 10/3 is applied when calculating the recommended working clearance between transmit-
ters in the 80 MHz to 2.5 GHz frequency range in order to reduce the probability that a mobile/portable communications
device unintentionally brought into the patient area could lead to interference.
Note 2: These guidelines may not apply in all situations. Propagation of electromagnetic waves is affected by absorption
and reflection from structures, objects and persons.
Bariatric Heavy Duty Long-Term Care Bed • DB300 • 5 Function Low Bed • Expands to 48" (Reorder No. 12013)
Working clearance according to transmission frequency (In meters - M)
150 kHz to 80 MHz at 3
V/m
0.12
0.38
1.2
3.8
12
80 MHz to 800 MHz at 3
V/m
0.12
0.38
1.2
3.8
12
(Continued)
800 MHz to 2.5 GHz at 3 V/m
0.23
0.73
2.3
7.3
23
5