Autonomic Mirage m-401e Manuel - Sayfa 9

Amplifikatör Autonomic Mirage m-401e için çevrimiçi göz atın veya pdf Manuel indirin. Autonomic Mirage m-401e 13 sayfaları. Multi-zone digital amplifier

Sayfayı Yazdır

Typical System Configuration (Continued)

Fig. 1 depicts a typical configuration where

the M-401e amplifier is providing audio

into six of the possible eight listening zones.

Only three of the zones are depicted.

Each zone consists of a room with

a pair of speakers and a suitable

controller. Each zone may be listening

on any of the connected sources:

• Mirage Media Server

• Satellite Receiver

• Tuner

• CD Player

Controllers

Each zone has a specific control

requirement. Choose controllers

that best suit the application.

Zone 1 – The Gym: Speakers & KP-6 Keypad

Zone 2 – The Study: Speakers &

KP-iOS Keypad

Zone 3 – The Lounge: Speakers & Tablets

The KP-6 Keypad may be plugged into

any of the four controller ports.

Source control IR emitters are plugged

into the IR ports. There are ten IR ports:

IR1 - IR8, and IR9 & IR10.

IR 1 – 6 route source specific IR signals

from connected controllers, while IR9 &

IR10 output the common IR or the sum

of all received IR signals.

These ports may be used for source

equipment that is common to all zones.

When controlling a stand alone M-401e

using an iPad or other web tablet, the

M-401e must be connected to a wi-fi

enabled ethernet router and the web tablet

browser must be directed to the M-401e's

IP Address. The M-401e's web application

also provides source control functionality.

Speakers

Speakers in each zone are connected to the

amplifier by "Home Run" speaker cables.

Source Equipment

The M-401e amplifier has eight stereo

RCA audio inputs for connecting

to source equipment. These input

channels feature coax digital inputs.

If a signal is present on the digital input,

it takes precedence over the analog

input. There are four additional Digital

only input channels featuring both coax

and Optical inputs. Any source can be

listened to in any zone, simultaneously.

All eight zones may select the same

source, in such circumstances there

is a possibility that all four zones may

be trying to control that source (not

always desirable) so a system should be

well planned and where appropriate

additional source equipment installed.

Mirage Media Server

When pairing your M-401e amplifier with

a Mirage Media Server, be sure to use the

Mirage Media Server's web configuration

Sources page and follow the pairing process

there. This will ensure full control via the

Mirage iOS and Android applications.