- ページ 9
アンプ Autonomic Mirage m-401eのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Autonomic Mirage m-401e 13 ページ。 Multi-zone digital amplifier
ページを印刷するTypical System Configuration (Continued)
Fig. 1 depicts a typical configuration where
the M-401e amplifier is providing audio
into six of the possible eight listening zones.
Only three of the zones are depicted.
Each zone consists of a room with
a pair of speakers and a suitable
controller. Each zone may be listening
on any of the connected sources:
• Mirage Media Server
• Satellite Receiver
• Tuner
• CD Player
Controllers
Each zone has a specific control
requirement. Choose controllers
that best suit the application.
Zone 1 – The Gym: Speakers & KP-6 Keypad
Zone 2 – The Study: Speakers &
KP-iOS Keypad
Zone 3 – The Lounge: Speakers & Tablets
1.
The KP-6 Keypad may be plugged into
any of the four controller ports.
2.
Source control IR emitters are plugged
into the IR ports. There are ten IR ports:
IR1 - IR8, and IR9 & IR10.
3.
IR 1 – 6 route source specific IR signals
from connected controllers, while IR9 &
IR10 output the common IR or the sum
of all received IR signals.
4.
These ports may be used for source
equipment that is common to all zones.
When controlling a stand alone M-401e
using an iPad or other web tablet, the
M-401e must be connected to a wi-fi
enabled ethernet router and the web tablet
browser must be directed to the M-401e's
IP Address. The M-401e's web application
also provides source control functionality.
Speakers
Speakers in each zone are connected to the
amplifier by "Home Run" speaker cables.
Source Equipment
The M-401e amplifier has eight stereo
RCA audio inputs for connecting
to source equipment. These input
channels feature coax digital inputs.
If a signal is present on the digital input,
it takes precedence over the analog
input. There are four additional Digital
only input channels featuring both coax
and Optical inputs. Any source can be
listened to in any zone, simultaneously.
All eight zones may select the same
source, in such circumstances there
is a possibility that all four zones may
be trying to control that source (not
always desirable) so a system should be
well planned and where appropriate
additional source equipment installed.
Mirage Media Server
When pairing your M-401e amplifier with
a Mirage Media Server, be sure to use the
Mirage Media Server's web configuration
Sources page and follow the pairing process
there. This will ensure full control via the
Mirage iOS and Android applications.
9