DCB XT-3305 Hızlı Başlangıç Kılavuzu

Ağ Donanımı DCB XT-3305 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. DCB XT-3305 4 sayfaları. Encrypted ethernet tunnel

This document guides the new user through configuration of two XT-3305 encrypted tunnels and

demonstrates tunneling encrypted data between two LAN segments by configuring a pair of units

as the Server and a Client. Connect two PCs through two XT-3305 units with a simulated

network between them, as diagrammed in Figure 1 below.

Figure 1 – Configuration for End-to-End Test, with Example IP Addresses

Requirements

1. Two XT-3305 units and knowledge of basic TCP/IP networking

2. One PC (preferably two) with wired Ethernet connections and any modern web browser

Step-by-Step Procedure

1: Open the first box and note the contents: The XT encrypted tunnel, Power Adapter, CDROM

containing manual and Application Notes, two Black Straight-through Ethernet cables with RJ-

45 connectors and 9-pin Female-to-Female Null Modem cable.

2: Configure a PC for use on the default LAN1 subnet of the XT-3305. Use the IP address

192.168.0.100 with a Subnet Mask of 255.255.255.0. This will be PC "A".

3: Power up the first XT-3305, (XT-3305 "A") to be configured as the Server unit.

4: Connect PC A to XT-3305 A's LAN1 trusted port (far right jack).

5: Open the browser (Internet Explorer, Firefox, Chrome, Safari), then enter:

https://192.168.0.1

XT-3305 Encrypted Ethernet Tunnel

Quick Start Guide

(NOTE that "https" is used, not http)

DCB, Inc.

2949 CR 1000 E

Dewey, Illinois

61840

217.897.6600 Tel

800.432.2638 Toll Free

217.897.8023 Fax